Nameplates

Stock Nameplates

All of the plates designated "SN" on this page are available in .020" and .032" gold satin brass. All of our SN Nameplates are available with (or without) holes, embossed nail heads or screw heads or permanent pressure sensitive adhesive. Please state your requirements when ordering. Escutcheon pins and screws for attachment are available.

Nameplates SN-5 and SN-6

SN-5 and SN-6 have single-line stamped borders.


SN-12 and SN-18

Plain

Nameplates SN-8 Through SN-17

Nameplates SN-35 and SN-41

SN-8, SN-9, SN-10, SN-11, SN-14, SN-15, SN-16, SN-17, SN-35
and SN-41 all have double-line engraved borders.


SN-13 and PL-20

Our PL-20 plate is available in .020" gold satin or bright brass and .020" silver satin or bright with our permanent pressure sensitive adhesive on the back. It can be supplied plain, with embossed nail or screw heads, or with holes.


 

Decorative Nameplates

Available in .020" gold bright brass with permanent pressure sensitive adhesive.

Decorative Plates


Brass Disks

Any of our Disks can be delivered with or without holes (to your specification). They are masked with heavy paper for the protection of the finish.

Brass Disks

R-1, R-2, and R-3 are available in .062" gold satin or bright brass. R-4 is available in .062" gold satin and .050" gold bright brass. R-5 is available in .032" gold satin brass and .50" gold satin or bright brass.

R-6, R-7, R-8

R-6, R-7 and R-8 are available only in .020" gold satin brass.


Custom Nameplates

Custom cut and blanked to your specifications, our engraver's brass and nickel silver are the finest quality available for engraving and are finished with a baked-on synthetic resin and masked with heavy paper to protect the finish. We stock .020", .050" and .062" bright and satin brass, .032" satin brass and .020" and .050" bright and satin nickel silver. We also stock plain and anodized aluminum in a variety of colors, "raw" (70/30) brass with a mill finsih and stainless steel (alloys 304 and 316) in bright, satin and mill finishes. All are stocked in a variety of thicknesses. Custom nameplates can be supplied with rounded, notched or square corners, engraved borders, embossed nail or screw heads, holes, rivets, screws, escutcheon pins or permanent pressure sensitive adhesive. Nameplates can also be supplied stamped or engraved. For the ultimate in low-cost nameplates, please contact us.

Custom Nameplates

All of our nameplates have die-cut edges with minimum burr on the reverse side.


Ornamental Nameplates

All of our Ornamental Nameplates are available with (or without) holes, embossed nail heads or screw heads or permanent pressure sensitive adhesive. Special hole sizes to meet your requirements. Escutcheon pins and screws are available. Custom lengths are also available.

Ornamental Nameplates

SN-1, SN-20, SN-2, SN-3, SN-4 and SN-19 are available in .020" and .032" gold satin or .020" bright brass and in .020" satin or bright nickel silver. E-18 and E-19 are available only in .050" and .062" gold satin or bright brass and in .050" satin or bright nickel silver. PP-1 is available only in .020" gold satin brass.



Please inquire about pricing
Different options available

Home Badges Nameplates Engravables ID Tags Starter Kits Specials Terms Contact Us